§ 62-213. Area, density and placement requirements.

Development within the industrial district shall conform to the following regulations:

(1)

Setbacks: Except as otherwise specified in this article, principal buildings and accessory buildings shall comply with the following setbacks: Front: 40 feet; Side: 15 feet; and Rear: 15 feet.

(2)

Building separation: A minimum separation distance of 20 feet shall be required between principal buildings.

(3)

Area: Except as otherwise specified in this article, lots in this district shall comply with the minimum requirements specified in the Manual for the Installation of On-Site Sewage Disposal administered by the Gilmer County Health Department.

(4)

Buffers: Any development within the I-1 district shall provide a buffer width of 50 feet if such I-1 district abuts any other district except I-1 or C-1, within said 50-foot buffer and adjacent to the property line, a buffer width of 25 feet is required and such width shall be planted with a combination of evergreen trees and shrubs in staggered formation. If existing trees and vegetation exists, the 25 feet adjacent to the property line may remain undisturbed. The purpose of such plantings is to create a barrier to vision and noise.

(Res. No. 05-97, Art. 11 § 1103, 8-25-2005; Res. No. 06-48, § 24, 3-8-2006)