§ 62-216. Area, density and placement requirements.

Development within the industrial district shall conform to the following regulations:

(1)

Setbacks: Except as otherwise specified in this article, principal buildings and accessory buildings shall comply with the following setbacks:

Front: 40 feet;

Side: 15 feet; and

Rear: 15 feet.

(2)

Building separation: A minimum separation distance of 20 feet shall be required between principal buildings.

(3)

Area: Except as otherwise specified in this article, lots in this district shall comply with the minimum requirements specified in the Manual for the Installation of On-Site Sewage Disposal administered by the Gilmer County Health Department.

(4)

Buffers: No buffer is required for any use in the PI-1 district.

(Ord. No. 16-164, 12-8-2016)