§ 62-132. Table of land use districts and requirements therein.

Classifications	Min. Size	Density	Side Setbacks	Front Setbacks	Rear Setbacks
A-1 (2)	3.0 (5)	N/A (5)	25	40/25 (4)	50
R-1 (2)	1.5 (3)	0.5/acre	20	40/25 (4)	40
R-2 (2)	1.0 (3)	1.0/acre	10	40/25 (4)	25 (1)
R-3	5.0	4.0/acre	50 (1)	40 (1)	50 (1)
C-1	N/A	N/A	15 (1)	40 (1)	15 (1)
I-1	N/A	N/A	15 (1)	40 (1)	15 (1)
PI-1	N/A	N/A	15	40	15

 

(1)

Greater set backs or buffers may apply according to adjacent zone classifications, check ordinance for specific land use classifications.

(2)

Not withstanding anything herein to the contrary, the setbacks on residential lots previously platted and recorded in the public records of Gilmer County, Georgia, shall remain as set out in either the CCR's or on the recorded plat of the subdivision.

(3)

Minimum lot size is less for greenspace subdivisions—(See definitions).

(4)

Front setbacks are 40 foot from the right-of-way of any county, public, or state road and 25 foot from the right-of-way of any interior subdivision road.

(5)

Minimum lot size is greater for those parcels subject to the 10.0 acre minimum required under section 62-133. Density of one unit per 3.25 acres applies to greenspace developments within A-1 district. See subsection 82-134(b).

(Res. No. 05-97, Art. 5 § 512, 8-25-2005; Res. No. 06-48, § 9, 3-8-2006; Res. No. 07-68, § a, 4-26-2007; Res. No. 10-006, 1-28-2010; Ord. No. 16-164, 12-8-2016)