![]() |
Gilmer County |
![]() |
Code of Ordinances |
![]() |
SubPart 2. LAND DEVELOPMENT ORDINANCE |
![]() |
Chapter 62. ADMINISTRATION |
![]() |
Article II. LAND USE ORDINANCE |
![]() |
Division 7. R-1: RESIDENTIAL LOW DENSITY DISTRICT |
§ 62-173. Area, density and placement requirements.
(a)
Building setbacks: Except as otherwise specified in this article, principal buildings and accessory buildings shall comply with the following setbacks: Front: 40 feet from the right-of-way of any county, public or state maintained road (not within a subdivision) and 25 feet from the right-of-way of any interior subdivision road; Side: 20 feet; and Rear: 40 feet.
(b)
Minimum lot size: The minimum lot size shall be 1.5 acre unless the option of a greenspace development is exercised. No area within road rights-of-way shall count towards the minimum lot size. The minimum lot width at the location of the home on the site shall be as follows: 150 feet for R-1 developments utilizing on-site wells and septic systems, 100 feet for R-1 developments served by public or approved private water supply and septic systems, or 90 feet for R-1 greenspace developments served by public or approved private water supply and sewerage. For all R-1 developments served by on site septic systems, greater widths and lot sizes may be required by the Gilmer County Environmental Health Department.
(c)
Density: The density for R-1 district shall be no more than 0.5 dwelling per acre (one lot for every two acres within the development).
(d)
Buffers: No buffer is required for any use in the R-1 district.
(Res. No. 05-97, Art. 7 § 703, 8-25-2005; Res. No. 06-48, § 13, 3-8-2006; Res. No. 06-182, § 3, 10-26-2006)