§ 82-92. Information required on final plat or accompanying final plat.  


Latest version.
  • The final plat shall conform to O.C.G.A. § 15-6-67 and the following:

    (1)

    A completed final plat application.

    (2)

    The final plat shall be drawn in permanent ink on reproducible material at a scale of not less than one inch equals 200 feet. The sheet size shall not exceed 17 inches by 22 inches. If more than one sheet is necessary to show the area the sheets shall be edge matched.

    (3)

    The plat shall contain sufficient engineering data to enable a surveyor to duplicate the plat on the ground.

    (4)

    The plat and related documents shall show:

    a.

    Name of subdivision;

    b.

    Name, address, and telephone number of developer (and property owner if different);

    c.

    Location map;

    d.

    Graphic scale, north arrow, date;

    e.

    Total number of acres being subdivided; minimum lot size, water source, and sewerage source;

    f.

    Location and description of monuments; and lot delineations such as iron pins;

    g.

    The tax map, parcel number and land use district of the parcel being subdivided, and the names and zoning classifications of all adjacent tracts;

    h.

    Names of streets and designation as to whether they are to be dedicated to Gilmer County or to be privately maintained. If privately maintained, final plat must include an executed private road construction certificate;

    i.

    Total length of streets in the subdivision by street class;

    j.

    All buffers, setbacks, and reserve strips shall be graphically shown and shall demonstrate minimum lot width at the building site;

    k.

    State sources of base flood elevations. Graphically show 100-year floodplain. If the subdivision is not located in a flood hazard area, a note to that effect shall be provided. The panel number and date of the FEMA issued flood insurance rate map shall be provided;

    l.

    If the new roads within the subdivision are to be privately maintained, the language within section 82-195 shall be placed on each sheet of the final plat;

    m.

    Certifications in section 82-94 which are applicable;

    n.

    As applicable, the seal of the surveyor and/or engineer with signature;

    o.

    Recordable copy of restrictive covenants and declarations;

    p.

    State "this property is subject to all buffers as required in this code and state and federal law";

    q.

    If the development is to have a property owners association, provide a certified copy of record from the secretary of state's office establishing the property owners' association or certificate of good standing for the association;

    r.

    If the roads are to be privately maintained, provide a recordable copy of the private road maintenance agreement. Each private road maintenance agreement must contain the language specified in section 82-194;

    s.

    Deed for all rights-of-way dedicated to and accepted by the board of commissioners and all other necessary bonds and documents;

    t.

    Other data necessary to complete the review required by this chapter by reviewing authorities;

    u.

    Agriculture notice as required in section 62-130.

(Ord. of 3-27-2003(5), § 3.300; Res. No. 06-47, 3-8-2006; Res. No. 06-190, § g, 11-9-2006; Res. No. 10-006, 1-28-2010)